Sony’s long awaited PSVR 2 isn’t here just yet but after an extensive hands-on with the headset it’s clear it’ll be worth the wait.

Last week I visited Sony’s PlayStation headquarters in San Mateo, CA to see PlayStation VR 2 in person for the first time. Though we’ve known the full on-paper PSVR 2 specs for quite some time now, there’s still a lot about using a headset that isn’t easily quantified from numbers alone. But after a few hours in the headset across a variety of different experiences, I’ve got a pretty good sense of what the full package really feels like.

PSVR 2 Hands-on Impressions

Keep in mind, of course, I was using a prototype version of PlayStation VR 2 which still isn’t due to launch until early 2023, so some things may change between now and then. I got to play four demos on the headset: Horizon Call of the Mountain, Resident Evil VillageThe Walking Dead: Saints & Sinners – Chapter 2, and Star Wars: Tales From the Galaxy’s Edge – Enhanced Edition. I’ll have more detail on my time with some of these demos specifically, but first, this is my experience with the headset overall.

From a form-factor standpoint, PSVR 2 is very similar to the original headset, right down to how you can stretch the rear headstrap to don the headset and then turn the crank to tighten it to taste. But through the lenses there’s much that’s changed.

A Feature Every VR Headset Should Have

Photo by Road to VR

For one, PSVR 2 now supports eye-tracking and IPD adjustment. And I’m happy to report that Sony has created a straightforward in-headset calibration which will help users dial into the ideal IPD and even make sure the headset is seated on their head correctly.

When you run the PSVR 2 calibration you’ll see a cartoon head in front of you with holes cut out of the eyes. Inside the holes are blue circles that represent your actual eyes. Your goal is to adjust the headset (both the way it rests on your head and by turning the IPD dial) such that the blue circles are in the center of the holes. Once you get close enough, the holes light up green to tell you everything is good to go.

This is a large quality-of-life improvement not just over the original PSVR, but over most VR headsets on the market. While many headsets have a manual IPD adjustment, few people actually know their specific IPD measured in millimeters—nor do they know to look for uneven chromatic aberration as a sign of misalignment—leaving most to just ‘wing it’ and try to align the lenses to their eyes by look and feel. With PSVR 2 you don’t need to know your IPD because the calibration step will automatically guide you to the ideal lens-to-eye alignment—ultimately helping more people achieve the clearest image they’ll be able to get from the headset. This is a feature every VR headset should have.

Passthrough & Playspace Setup

Another nice quality-of-life improvement on PSVR 2 is passthrough video, which allows you to use the headset’s cameras to not just look out to the real-world, but also to easily define your playspace boundary. The passthrough video view is noticeably higher resolution on PSVR 2 than Quest 2, though it’s still black-and-white and far from maxing out the headset’s display resolution.

Image courtesy PlayStation

PSVR 2’s playspace setup process is very similar to what you see on Quest 2: you’re able to draw an outline from within your headset to set your boundary. Additionally the headset ‘scans’ the space around you to make an initial suggestion for your playspace, which you can then expand or refine as you see fit.

Display & Lenses

Photo by Road to VR

So once you’ve got the headset calibrated and your playspace defined, how does it actually look? Well for one, it’s a heck of a lot clearer than the original PSVR thanks to the jump in resolution from 960 x 1,080 (1.0MP) per-eye to 2,000 x 2,040 (4.1MP). The screen-door effect is functionally invisible, though a noticeable amount of mura (brightness & color inconsistency from one pixel to the next) holds back clarity to some extent.

Mura is often worse on OLED displays (such as the one in PSVR 2) than LCD, but for that downside you get the benefit of much better contrast which brings rich darks and deep colors. In vibrant games, like Horizon Call of the Mountain, the world really pops.

While Sony says PSVR 2 has an ‘HDR display’ (a fairly ill-defined term), they haven’t specified the max brightness of the headset. In my time with it there weren’t many moments where I felt like HDR was making an obvious difference; this level of ‘HDR’ may just feel a bit more like expanded contrast compared to high-end HDR-capable TVs and phones where the effect is plainly visible.

Though generally quite sharp, I did notice what appeared to be a good bit of persistence blur on PSVR 2 which causes the world to get somewhat blurry when rotating your head. This struck me as perhaps an issue with the display’s low-persistence function (which most VR headsets employ to combat this issue). Assuming I’m right about this being a persistence issue (and I could well be mistaken), it isn’t clear to me if low-persistence isn’t enabled at all, not yet fully tuned, or maybe it’s already optimized but this is just a fundamental limitation of the display. Sony declined to comment on the matter for now.

Photo by Road to VR

Also on the clarity front… I’m tentatively impressed with the Fresnel lenses on PSVR 2. Most headsets with Fresnel lenses suffer from quite noticeable glare and god rays, but they seemed quite subdued (though not entirely invisible) on PSVR 2 compared to contemporary headsets. As I was being hurried through various demos, I didn’t get to find the ideal test scene to reveal god rays, but as I said, I’m impressed with the levels I saw during nominal gameplay. Fingers crossed that Sony cooked up some special lenses that really are making a difference.

And another nice thing about the lenses on PSVR 2: the field-of-view feels noticeably larger than the original PSVR (Sony claims 110° compared to the original 100°). It’s a nice little boost though it’s not going to make or break your experience.

A New Dimension of VR Haptics

Photo by Road to VR

And you might forget about another new feature until you feel it… PSVR 2 is (likely to be) the first on the market to come equipped with head-haptics. That gives developers the option to give your head a little rumble to communicate in-game effects. It works well to give you an even more intimate sensation than controllers rumbling in your hands. It seems like PlayStation VR 2’s head-haptics will be a perfect stand-in for the moments where ‘screen shake’ would typically be employed in non-VR games (ie: big explosions or really important things happening to your character directly).

Continue on Page 2: Controllers, Tracking, & Conclusion »